WATER
PROOFING
PRODUCTS
Brands:
.png)
SikaCoat®-500 Super
SikaCoat®-500 Super is a one component, water-base, liquid elastic waterproofing coating, based on styrene-acrylic copolymers with integral micro-fibre reinforcement. SikaCoat®-500 Super coating system is formulated to provide enhanced tensile strength of the coating product and forms a flexible, tough and durable reinforced protective waterproofing membrane layer. It is suitable for use in hot and tropical climates.
内部增强微纤维苯丙共聚物防水液膜涂料
.png)
SikaWall®-191 Base
Formerly known as Brefill® Mortar. SikaWall®-191 Base is a cement based filling and levelling plaster for concrete surfaces. SikaWall®-191 Base consists of finely crushed white marble and high grade sand of consistent quality and composition, modified with alkali-resistant additives.
用于内墙的高性能水泥基底漆
SikaWall®-603 Acrylic
SikaWall®-603 Acrylic is a skim smoothing rendering paste that is used for levelling uneven surfaces and repairing surface defects in concrete, plasters and drywalls. A smooth surface is obtained by eliminating blemishes such as grooves, seams, fine cracks and blowholes.
即用型丙烯酸脱脂外套
SikaBit® PRO P-30-0 Sand
SikaBit® PRO P-30-0 Sand is an APP modified, bituminous, torch-applied, waterproofing membrane. It is reinforced with a dimensionally stable non-woven polyester inlay. The underside has a thin polyethylene burn-off film for easy application. It can be applied to wood, metal and concrete substrates including over existing bitumen roofing membranes. Top surface finish: sand. Thickness: ~3.0 mm
塑性改性沥青防水卷材
SikaBit® PRO P-45 G-0 MG
SikaBit® PRO P-45 G-0 MG is an APP modified, bituminous, torch-applied, waterproofing membrane. It is reinforced with a dimensionally stable non-woven polyester inlay. The underside has a thin polyethylene burn-off film for easy application. It can be applied to wood, metal and concrete substrates including over existing bitumen roofing membranes. Top surface finish: mineral granules. Weight: ~4.5 kg/m²
塑性改性沥青防水卷材
Davco Ceramic Tile Cleaner 800
Davco Ceramic Tile Cleaner 800 is general purpose cleaner designed for routine maintenance of showers, bathrooms and other tile / stone / masonry installations. It safely and easily removes mold and mildew, as well as mineral deposits, hardwater and rust stains.
瓷砖、灌浆和砖石清洁剂
Pentens T-100
PENTENS T-100 is a specially produced PU bituminous waterproofing compound for use on both internal and external surfaces. It will bond perfectly to almost any surface such as concrete, masonry, metal and timber. It may be applied to new or existing structures, and will bond to a damp surface. It can also be mixed with sand, to form a mortar of any desired consistency.
Pentens Bituflex 101
PENTENS BITUFLEX 101 is a low viscosity blend of water-based bituminous specially formulated to produce a tough and durable bituminous film when dry. PENTENS BITUFLEX 101 also is a single component which is newly developed polymer of MMA, natural rubber, and polyurethane combines with the reaction with asphalt and then being modified and further emulsified to form elastic waterproof membrane.
Pentens AB-BOND
PENTENS AB-BOND is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete and mortar to prevent water infiltration. Can use to potable water tanks, terraces and balconies, RC gutters, bathroom floors and walls, basements, retaining walls, seawalls.
Pentens Easycoat WP1+
PENTENS EasyCoat WP1+ is an one component water-based flexible cementitious waterproofing system and easy to apply. As the intermediate coating of waterproof material. Have leveling effect for the work surface is not flat such as crack and gap. Increase of the waterproofing layer, strengthen the surface.
Pentens T-200
PENTENS T-200 is a newly developed Acrylic polymer waterproofing coating offering a hardness and durability. It resists ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness, and remains flexible at low temperatures. It is a warranted roofing and tanking product.
Pentens Easysov WP5+
Pentens EasySov WP5+ is a state-of-the art 5 in 1 multi functional synthetic rubber based waterproofing product. The use of ultra high pressure water jet cutting process treated recycled rubber granules to replace the greater part of conventional fillers and aggregates in product formulation, up to 40% of total product weight, makes Pentens EasySov WP5+ an eco-friendly coating with extraordinary physical properties.
Nippon Flex 200
Nippon FLEX 200 is a single component, elastomeric, breathable, acrylic copolymer liquid apply waterproofing coating. It resists ageing from heat, UV, sunlight, rain, wind or frost and ozone. Able to resists water yet allows water vapour to escape through it and thus, preventing blistering issue. A basic waterproofing coating for old and new construction.
Product Features:
-
Single component - no mixing required
-
Easy to apply
-
Flexible - capable of bridging stationary cracks
-
Barrier against salts and atmospheric gases
-
High build - masking imperfections in substrates
-
Waterproof-versatile and multi-purpose
-
UV stable- long service life and maintains its appearance
Nippon Latex 118
Nippon Latex 118 is a single component, synthetic polymer emulsion for addition to cement to use as bonding agent. It also acts as cement mortar strengthening additive. Suitable for tropical climates.
Product Features:
-
Enhance adhesion
-
Reduce shrinkage
-
Excellent water resistance
-
Increase abrasion resistance
-
Improve chemical resistance
-
Non-corrosive
-
Ready for use